Jaguar XK120 BumpersJaguar XK120 Bumpers

    Mirror-polished stainless steel or chrome: what's the difference?

    We are often asked whether our bumpers are chrome-plated. They are not: they are made of mirror-polished 304 stainless steel. To the eye the difference is small, which is exactly the point. But the material is completely different, and that is what matters over time.

    Chrome: a few microns of plating on steel

    Most original bumpers are made of steel, electroplated with successive layers of copper, nickel and then chrome. This coating is only a few microns thick. Over the years, moisture and road salt get in through micro-cracks and stone chips, and the steel starts to rust under the plating. That is what causes the pitting, blistering and flaking every collector knows. Once the chrome is damaged, the only fix is full re-chroming: stripping, straightening, then new plating.

    Stainless steel: protection throughout the metal

    304 stainless steel is steel alloyed with about 18% chromium and 8% nickel. The chromium is not applied on the surface: it runs through the whole thickness of the metal. In contact with air it forms an invisible protective layer that rebuilds itself if scratched. There is no coating to peel off, and a scratch can be polished out.

    Can you tell them apart?

    Mirror-polished stainless steel has a shine very close to chrome. Chrome has a slightly bluer, colder reflection; stainless steel a slightly warmer one. Once fitted to the car, most people cannot tell the difference, hence the frequent confusion.

    Chrome and mirror-polished stainless steel at a glance

    Chrome-plated steelMirror-polished 304 stainless steel
    MaterialSteel plated with copper, nickel and chromeStainless steel throughout
    Rust protectionProvided by a coating a few microns thickProvided by the material itself
    After a knock or scratchThe plating is broken and the steel can rust underneathNo coating to break; the scratch can be polished out
    AppearanceShiny, slightly bluish reflectionShiny, slightly warmer reflection
    RestorationFull re-chromingPolishing

    Caring for stainless steel bumpers

    • Wash them with soapy water, like the bodywork, then dry them.
    • From time to time, a metal polish brings back their full shine.
    • Avoid steel wool and abrasive sponges: they leave iron particles that can cause rust spots on the surface.
    • After driving on salted roads, rinse them with clean water.

    Frequently asked questions

    Are your bumpers chrome-plated?

    No. They are mirror-polished 304 stainless steel. Their shine comes from polishing the metal, not from a coating.

    Can a stainless steel bumper rust?

    Stainless steel does not rust through. In very salty conditions, or in contact with iron particles, light marks may appear on the surface: they come off with polish.

    Do stainless steel bumpers follow the original lines?

    Yes. Each part follows the lines of the original bumper, then it is checked, adjusted and polished in our workshop before shipping.

    How do I know if you make bumpers for my car?

    Browse our catalogue by make, or contact us with your vehicle's model and year.

    Find bumpers for your car · Contact us